Accessories; Troubleshooting - Ryobi PMP01 Manuel D'utilisation

To order these accessories, call 1-800-525-2579.
 Brass Nozzle ........................................................................................................................................ Model No. PMC080
 Hanging Mounts .................................................................................Model No. PMC430HM, PMC420HM, PMC410HM
 Inline Misting Filter ............................................................................................................................. Model No. PMCF009
 Nozzle Cleaner .................................................................................................................................. Model No. PMCC008
WARNING:
Current attachments and accessories available for use with this product are listed above. Do not use any attachments
or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not
recommended can result in serious personal injury.
PROBLEM
Leak at nozzle, threaded hole, or con-
nection
Misting kit will not spray
Loss of pressure
NOTE: ILLUSTRATIONS START ON PAGE 9 AFTER FRENCH

ACCESSORIES

TROUBLESHOOTING

POSSIBLE CAUSE
Nozzles were installed improperly.
Nozzles clogged or dirty.
Pump is off.
Nozzles clogged or dirty.
Debris in misting kit.
End cap not installed.
AND SPANISH LANGUAGE SECTIONS.
8 — English
SOLUTION
Reinstall nozzles and tighten securely.
Clean nozzles.
Turn pump on.
Clean nozzles.
Follow instructions for flushing the
system in Assembly.
Install end cap.