Prepare For Installation - Yakima BowDown Instructions De Montage

PREPARE FOR INSTALLATION

Raise BowDown up,
then tighten the knob
with firm pressure.
Loosen the knob 6
to 8 turns. Do not
remove knob.
ADJUST BAIL POSITION (IF NECESSARY)
FACTORY
Middle notch
BAR
for round bars.
ONLY
Choose best
ROUND BAR
position for most
secure grip.
Upper notch for
square bars.
NOTE: Some smaller
factory bars may require
the short, black T-bolts
SQUARE BAR
included with this product.
INSTALL BOWDOWN
POSITION BOWDOWN ON VEHICLE
Position BowDown
on the crossbar.
Position the tip of BowDown so that it
protrudes slightly further than the crossbars.
1033423E-2/21