Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
ON/OFF
To Power ON the meter rotate the Function Selector switch
the OFF setting to any measurement setting. To Power OFF the meter
rotate the Function Selector switch
the meter will automatically Power OFF after 30 minutes of inactivity.
Reactivate meter by pressing any button. To deactivate the automatic
Power OFF feature, power the meter ON with the SEL button
depressed. When automatic Power OFF is deactivated, the
symbol will not be visible in the display.
When the Function Selector switch is rotated to a measurement
setting, "LEAD" flashes on the display as a reminder to check that test
leads are inserted into the appropriate jacks.
"SEL" (SELECT) BUTTON (FOR SECONDARY FUNCTIONS)
The "SEL" button
setting accessible by the Function Selector switch
Voltage and Low Z, it toggles between AC and DC. For the other
functions, it switches between °F and °C, between Hz and %
Duty-cycle, and between Continuity, Resistance, and Diode-test.
The default function for each application is printed on the meter in
white; the secondary functions are printed on the meter in orange.
"HOLD" (DATA HOLD / BACKLIGHT) BUTTON
Press HOLD
10
again to release the display to return to live measuring.
Press and hold the "HOLD" button
turn on or off the backlight. The backlight will automatically Power
OFF following three minutes of inactivity to conserve battery life.
"RANGE" BUTTON
The meter defaults to auto-ranging measurement mode
automatically determines the most appropriate measurement range
for the testing that is being conducted. To manually force the meter
to measure in a different range, use the "RANGE" button
1. Press the "RANGE" button
range (
the "RANGE" button
stopping once the desired range is reached.
2. To return to auto-ranging mode, press and hold the "RANGE"
button
for more than one second (
7
8
FUNCTION BUTTONS
activates the secondary functions for each
11
to hold the measurement on the display. Press
is deactivated on the LCD). Repeatedly press
to cycle through the available ranges,
7
2
to the OFF setting. By default
for more than one second to
10
to manually select measurement
7
2
11
2
. For Current,
.
7
is reactivated).
from
. This
Publicité
Table des Matières
