Klein Tools MM700 Manuel D'utilisation page 12

ENGLISH
AC/DC CURRENT
NOTE: The meter defaults to AC measurement. To measure DC, press
the "SEL" button
DC icon on the LCD indicates which mode is selected.
1. Attach test leads to the appropriate jacks and rotate function
selector switch
• For AC/DC currents >400mA and <10A: Insert RED test lead into
10A jack
3
function selector switch
Red lead
• For mA AC/DC currents <400mA: Insert RED test lead into
mA/µA jack
rotate function selector switch
• For µA DC currents <400µA: Insert RED test lead into
A/mA jack
rotate function selector switch
12
OPERATING INSTRUCTIONS
to toggle between AC and DC modes. The AC
11
to the appropriate setting as follows:
2
, and BLACK test lead into COM jack
Black lead
, and BLACK test lead into COM jack
6
Red lead Black lead
, and BLACK test lead into COM jack
6
Red lead Black lead
to the 10A AC/DC
2
to the mA AC/DC
2
to the µA AC/DC
2
, and rotate
4
setting.
, and
4
setting.
, and
4
setting.