Check Bag Indicator - Hoover TurboPOWER Manuel De L'utilisateur

8
Push plug on power nozzle cord
8
completely into receptacle under-
neath hand grip.
Always disconnect cleaner from elec-
trical outlet before attaching or
removing power nozzle plug.
1 0

Check bag indicator

The indicator will begin to show re d
1 0
as bag fills with dirt. There are thre e
conditions that will cause the indicator to
become completely red:
1. The bag is full; change the bag.
2. Ve ry fine materials (such as powder)
have been picked up, clogging the bag
p o res; change the bag, even if it is not full.
3. There is a blockage in the nozzle, hose,
tools, or at the bag opening; remove the
b l o c k a g e .
4
How to use
To reduce the risk of electric shock, this
appliance has a polarized plug (one
blade is wider than the other). This
plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does
not fit, contact a qualified electrician to
install the proper outlet. Do not change
the plug in any way.
1 1
Deluxe power
nozzle
Handle positions
The handle has two positions when
1 1
used with the power nozzle:
upright and operating.
To lower handle to operating position,
place your foot firmly on the power noz-
zle and pull handle back.
9
B
A
ON-OFF switches
After assembling cleaner, plug
9
cord into electrical outlet. Turn
cleaner on by depressing ON-OFF
pedal (A). To turn cleaner off, depress
pedal again.
Note: Pedal opposite ON-OFF pedal is
Cord Rewind Pedal (B).
1 2
Floor surface
selector
Carpet or rug cleaning
When using the power nozzle for
1 2
carpet and rug cleaning, push the
floor surface selector button toward
"RUG" (A). This setting provides the
suction and agitator action necessary to
deep clean carpets. The nozzle adjusts
automatically to various carpet pile
heights.
A