Description Of Components; Remote Control - klover WAVE 90 Instructions D'utilisation

CS.W110.IST-1 / Rev 1.3

DESCRIPTION OF COMPONENTS

Remote control

Key 1 – INCREASE
Key 2 – DECREASE
Key 3 – ON/OFF
The remote control must be fitted with 3 AAA 1.5 V batteries (mod. LR03 / MN2400); The battery life depends on how often the remote control is used.
The table explains how the keys on the remote control work.
Key Description
1 INCREASE
2 DECREASE
3 ON/OFF
4 SET
5 ESC
Mode
On the first press...
Programming mode..
On the first press...
Programming mode..
On the first press...
Working..
Off..
In alarm block..
Menu/programming mode..
On the first press...
Menu mode..
Programming mode..
On the first press...
Menu mode..
Programming mode..
Action
Allows you to modify the room temperature "SET ROOM".
Changes/increases the value of the selected menu item.
Increases the room temperature setting/operating power.
In "SET DUCTING" mode, it modifies the value of ducting 2.
Allows you to modify the operating power "SET POWER".
Changes/decreases the value of the selected menu item.
Decreases the room temperature setting/operating power.
In "SET DUCTING" mode, it modifies the value of ducting 1.
Activates the display.
Switches the appliance off when pressed for 2 seconds.
Switches the appliance on when pressed for 2 seconds.
Releases the alarm.
Moves you to the previous menu level, not saving the changes made.
Enters the user menu.
Moves you to the next menu item, storing the changes made.
Moves you to the next submenu item, storing the changes made.
Allows you to modify the speed of the ducted fans "SET DUCTING".
Moves you to the previous menu item, storing the changes made.
Moves you to the previous submenu item, storing the changes made.
11
Display
Key 5 – ESC
Key 4 – SET
ENGLISH