Making Coffee; Using The Timer - Russell Hobbs Inspire 24391-56 Mode D'emploi

BEFORE USING FOR THE FIRST TIME
Fill the reservoir to the max mark, and run the appliance without coffee.
FILLING
1. Remove the carafe from the hotplate.
2. Open the lid.
3. Fill the reservoir with the exact amount of water required. Note that the brewing process will use all
of the water that you put in the reservoir.
4. Make sure that the filter holder is pressed down all the way into position. It will click when correctly
installed.
5. Put a #4 paper filter into the filter holder.
6. The reservoir is calibrated to give 10 large cups (at 125ml per cup) and 15 small cups (at 83ml
per cup). For each large cup, add 6g of ground filter coffee and for each small cup add 4g.
7. Close the lid.
8. Replace the carafe on the hotplate.
SET THE CLOCK
It isn't neccessary to set the clock to use your coffee maker but you will need to set it if you want to use the
timer functions.
1. Put the plug into the power socket.
Use the hr and min buttons to set the correct time in 24 hour format.
2.
• The clock will retain its settings until the coffee maker is unplugged.
To change the time, press the T button. The time will flash. Use the hr and min buttons to set the
•
new time. If you don't press either the hr or min buttons within 3 seconds, the coffee maker will
revert to normal, and the current time will show.

MAKING COFFEE

1. Press the 1 button – the 1 icon will appear on the display.
2. Shortly afterwards, coffee will start to drip into the carafe.
3. If you want to stop the coffee maker while it's brewing, press the 1 button.
4. Once brewed, the hotplate will keep the carafe warm for up to 40 minutes.

USING THE TIMER

Note: Make sure the clock is set to the correct time. Use the h and min buttons.
1. Set the timer to the time you want to start brewing.
a) Press and hold the T button until the T icon flashes on the display.
Use the h and min buttons to set the time you want brewing to start.
b)
If you don't press either the hr or min buttons within 3 seconds, the coffee maker will revert to
normal, and the current time will show. Press the T button to start again.
When the time is programmed, press the 1 button. The T icon will appear on the display. Your
2.
coffee maker is now set to make coffee at the selected time.
If you want to check the program time press the T button. The programmed time will show for 3
•
seconds and then return to the time of day.
• If you want to cancel the timer before brewing has started, press the 1 button.
• If you want to stop the coffee maker while it's brewing, press the 1 button.
4