Sanitaire PROFESSIONAL SL4410A Serie Guide De L'utilisateur page 8

ENGLISH
WARNING
!
• Plastic film can be dangerous. To avoid danger
of suffocation, keep away from babies and
children.
• Do not plug in your vacuum cleaner until you
are familiar with all instructions and operating
procedures.
• To reduce the risk of electric shock, turn Power
Switch OFF and disconnect plug from electrical
outlet before performing maintenance or
troubleshooting checks.
ASSEMBLY
You will need a Phillips-head screwdriver
for assembly.
Attach Handle to Vacuum
• Locate Handle and remove screw packet taped to the
base of the handle.
• Stand the vacuum upright and place the base of the
Handle firmly into the grooves at the top of the vacuum
body.
• Insert the two (2) screws into the existing holes on each
side and tighten securely.
Attach Vacuum Hose and Tools
Fig. 2 Line up tabs on the base of the Twist 'n Snap™
Hose with the corresponding notches on the hose
collar. Turn the hose to the right to lock into place.
Fig. 3 Grasp the Quick Reach® Handle and slide the end
of the hose into the Hose Wand Base. Snap the
hose into the upper Hose Clip on handle.
Fig. 4 Slide the Extension Wand and crevice tool together
into storage clip.
Fig. 5 Snap the Combination Dusting Brush/Upholstery
Tool into the storage clip.
8 www.sanitairecommercial.com
(Fig. 1)
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5