Extension Cord; Optional Accessories - Dolmar EM411 Manuel D'instructions

Rotate the sleeve.
2.
► Fig.50: 1. Sleeve
Rotate the nut until the nut reaches the sleeve.
3.
► Fig.51: 1. Sleeve 2. Nut
Tighten the nut with a wrench while holding the
4.
sleeve with another wrench.
► Fig.52: 1. Sleeve 2. Nut
Turn on the machine and check that the rear
5.
wheels rotate smoothly when you squeeze the drive
lever.
If the rear wheels do not rotate smoothly, adjust the
length of the cable again.

Extension cord

You should only use extension cords for outdoor use,
PVC or rubber cord ordinary duty with a cross sectional
area not less than 1.5 mm
Before and during use, check the supply and extension
cords for damage. Do not use the appliance if the cord
is damaged or worn. Keep extension cord away from
cutting elements. If the cord is damaged during use,
disconnect the cord from the supply immediately. Do not
touch the cord before disconnecting the supply.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita/
Dolmar tool specified in this manual. The use of
any other accessories or attachments might present
a risk of injury to persons. Only use accessory or
attachment for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita/Dolmar
Service Center.
• Mower blade
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
2
.
17 ENGLISH