Accessories - Thermador Masterpiece Serie Manuel D'installation

A C C E S S O R I E S
Flexible Blower
Thermador Model VTD600P
MODEL DESCRIPTION
Non-Duct Recirculating Kit
Used in applications where ducting is not
feasible or available. Mount to toe kick
or base of a cabinet and attach directly
to VTD600P Flexible Blower using 8"
(203mm) round duct. Kit can be rotated
so that the exhaust is not directly at your
feet. Includes decorative cover plate.
UCVRECIRC
UCVFILTER
(replacement ilter)
Rough-in Plate - 8" (203mm) Round
Use for applications where 8" (203mm)
round duct or elbow attaches to front
of airbox (VTD600P inline blower
installation).
CVTFRONT8
Rough-in Plate - 6" or 10" (152mm or
254mm) Round
Use for applications where 6" or 10"
(152mm or 254mm) round duct or elbow
attaches to front of airbox (inline or
remote blower installation).
CVTFRONT6
CVTFRONT10
Extension Cable - 5-ft. (1.5m)
Used in applications where the electrical
panel is remotely mounted. If blower
discharge is down, electrical panel
must be relocated. Extends electrical
panel cable an additional 5-feet (1.5m)-
with the ability to connect up to two
EXTNCE5
extension cables.
Gas Cooktop Seal Kit - 30-in. (762mm),
36-in. (914mm)
Used to provide seal between gas
cooktop and downdraft. Also includes
cabinet hole cover plates. Two grilles are
provided in the kit, you may only need
UCV30ST
one for your speciic installation.
UCV36ST
Rectangular Duct - 2-ft. (0.6m) sections
(1-7/8" x 19" /48mm x 483mm)
Galvanized steel construction.
2-ft. (0.6m) sections can be connected
together.
CVDUCT2
Rectangular Adapter for 1-7/8" x 19"
(48mm x 483mm)
Use to connect 1-7/8" x 19" (48mm
x 483mm) rectangular duct directly
to downdraft when using side or
rear exhaust.
CVTRECT2
Page 12
(purchase separately)
Inline and Remote Blowers
Thermador Models VTI610, VTR630, VTI1010, VTR1030, VTR1330
MODEL DESCRIPTION
1-7/8" X 19" (48mm x 483mm)
to 8" (203mm) Round
Transition
Rectangular to 8" (203mm) round
transition for left, right, or rear exhaust -
using Model VTD600P Flex Blower.
Can be attached to downdraft unit or
rectangular duct (CVDUCT2).
CVTSIDE8
1-7/8" X 19" (48mm x 483mm) to 6" or
10" (152mm or 254mm) Round
Transition
Rectangular to 6" or 10" (152mm or
254mm) round transition for left, right,
or rear exhaust using inline or remote
blower. Can be attached to downdraft
unit or rectangular duct (CVDUCT2).
CVTSIDE6
CVTSID10