EN
ACCURACY COARSE / NORMAL / FINE
The FR 45 / FRG 45-Green is equipped with three precision modes. They can be chosen by pressing
button (9):
Accuracy coarse
Symbol on display: without symbol
Accuracy normal
Symbol on display:
Accuracy fine
Symbol on display:
INSTALLATION OF THE BATTERIES
• Open the battery compartment cover (7).
• Insert 1 x 9 V AA battery according to the installation symbol (ensure correct polarity!). Close the
cover.
• In order to save battery power the receiver will automatically turn off if it has not received laser scan-
ning singal for 5 minutes.
USE OF THE RECEIVER
Press button (5) to switch the unit on.
Move the receiver up and down carefully to detect the laser beam.
Move the receiver down
A
Acoustic signal : ultra-short requent beep
B
Move the receiver up
Acoustic signal: short requent beep
C
On level
Acoustic signal: continuous beep
A+B: The closer the distance to „on level" (C) is,
the shorter the arrows become.
CLAMP FOR LEVELLING STAFF
If required the receiver can be attached to laser poles or any other equipment by means of the clamp
supplied with.
22
± 10 mm
± 4 mm
± 2 mm