For Operating Other Functions - JVC D-ILA DLA-G11U Manuel D'instructions

Basic Operations (Cont.)
Remote control unit
OPERATE
COMPUTER VIDEO
T
VOL.
ZOOM FOCUS
W
MENU/ENTER
PAGE
BACK
PRESET
QUICK AV
ALIGN. MUTING
QUICK ALIGN. button
Projector's button
STAND BY
OPERATE
LAMP
TEMP
EMERGENCY
VIDEO
COMPUTER
SETTING
+ 3
QUICK
ALIGN.
- 2
QUICK ALIGN. buttons
AV MUTING button
• This function works only for computer system inputs.
• When performing automatic adjustment using the quick
¶ For Operating Other Functions
To turn off video image and audio sound temporarily
Press the AV MUTING button.
Press once:
Video image and audio sound turn off (do not come out).
Press again:
Video image and audio sound come out again.
Remote control unit
AV
MUTING
To use the quick alignment function
The quick alignment function is used to automatically adjust (set)
the screen settings of "TRACKING, PHASE, H. POS. and V. POS."
of computer system input video.
• Use either the remote control's or projector's button.
When using the remote control unit:
Press the QUICK ALIGN. button.
When using the projector:
Clear the menu display, and press the projector's QUICK
ALIGN. "+ 3" and "– 2" buttons at the same time.
* During the automatic adjustment, "QUICK ALIGNMENT" appears
on the screen and disappears automatically after the adjustment
is completed.
Remote control unit
QUICK
ALIGN.
Screen display
Q U I C K A L I G N M E N T
Note
It does not work for AV inputs.
CAUTION
alignment function:
Use a bright, still-picture screen. It may not function correctly on a
dark or motion-picture screen.
If the condition adjusted by using the quick alignment function is not
good, manually adjust TRACKING, PHASE, H. POS. and V. POS.
(see pages 31, 37 and 38).
Projector
+ 3
QUICK
ALIGN.
-
2
29