Dyna-Glo DGP350NP Manuel De L'utilisateur Et Instructions D'utilisation page 27

OPERATION INSTRUCTIONS
Warning: Do not lean over grill when lighting.
Read instructions before lighting.
1. Insert a match in the end of the match holder that is installed
on the inside of the cabinet door.
2. Light the match.
3. Immediately place the lit match through the 20mm hole on the side of the grill
body, nearest the burner you want to light. Make sure the lit match is close
to the burner ports.
4. Press in the control knob that operates that burner and rotate
counterclockwise
light immediately.
5. Adjust burners to desired cooking settings.
If lighting both burners is required, repeat steps 1 through 4 to light the other burner.
1. Turn control knobs clockwise
2. Close valve at tank fully by turning clockwise.
3. Close lid.
Turn off LP supply at cylinder when appliance is not in use.
LP Gas Grill
LIGHTING THE GRILL WITH A MATCH
to High
SHUTDOWN INSTRUCTIONS
position and burner should
to the off position.
25