Operation Instructions; Connecting Gas Cylinder - Dyna-Glo DGP350NP Manuel De L'utilisateur Et Instructions D'utilisation

LP Gas Grill

OPERATION INSTRUCTIONS

CAUTION :
Only use the regulator and hose assembly provided!
If a replacement is necessary, please call our customer service center.
Do not use replacement parts that are not intended for this grill.

Connecting Gas Cylinder:

The propane gas supply cylinder to be used must be constructed and marked in
accordance with the Specifications for LP Gas Cylinders of the U.S. Department
of Transportation (D.O.T.) or the National Standard of Canada, CAN/CSA-B339,
Cylinders, Spheres and Tubes for Transportation of Dangerous Goods; and
Commission, as applicable; and Provided with a listed overfilling prevention device.
Use only 20-pound cylinders (Height 18.11", Diameter Tank 9.84", Diameter foot:
8.03") equipped with a cylinder connection device compatible with the connection for
outdoor cooking appliances. The cylinder must include a collar to protect the cylinder
valve. The gas cylinder should not be dropped or handled roughly!
If the appliance is not in use, the gas cylinder must be disconnected. Storage of an
appliance indoors is permissible ONLY if the cylinder is disconnected and removed
from the appliance. Cylinders must be stored outdoors out of the reach of children
and must not be stored in a building, garage or any other enclosed area. Your
cylinder must never be stored where temperatures can reach over 125°F.
Place dust cap on cylinder valve outlet whenever the cylinder is not in use. Only
install the type of dust cap on the cylinder valve outlet that is provided with the
cylinder valve. Other types of caps or plugs may result in leakage of propane.
Before connection, be sure that there is no debris caught in the outlet of the gas
cylinder, outlet of the regulator valve or in the outlet of the burner and burner ports.
Connect regulator valve and hand-tighten firmly. Disconnect the propane cylinder
from the regulator valve when the grill is not in use.
DO NOT obstruct the flow of combustion air and ventilation air to the grill. The
propane cylinder must be arranged for vapor withdrawal and equipped with a listed
overfilling prevention device. Please put the proper cylinder orientation to provide
vapor withdrawal.
21