Dyna-Glo DGP350NP Manuel De L'utilisateur Et Instructions D'utilisation page 17

Step 12
Install the collapsible
shelf support A (14) and
collapsible shelf support B
(15) on both sides of the
grill body using hardware
part E (M5x12 screw).
Hardware Used
E
Step 13
WARNING:
ENSURE THAT EACH AND EVERY BURNER IS FULLY ENGAGED
WITH THE ADjACENT VALVE ORIFICE BEFORE COMPLETING STEP 13.
FAILURE TO DO SO MAY RESULT IN FIRE OR ExPLOSION, POSSIBLY
CAUSING SERIOUS INjURY OR DEATH. REFER TO MAINTENANCE
SECTION INSTRUCTIONS TO PROPERLY CHECK THE ENGAGEMENT.
LP Gas Grill
ASSEMBLY INSTRUCTIONS
14
M5x12
16 pc
Scr ew
IT IS VERY IMPORTANT TO CHECK AND
Open the lid and place the two heat tents (16) on the brackets
directly above the burners on the inside the grill body.
16
15 12
14
A
B
15: Collapsible
Collapsible
Shelf Support B
Shelf Support
Qty: 2 pcs
E
15
15