Dyna-Glo DGP350NP Manuel De L'utilisateur Et Instructions D'utilisation page 13

Step 5
1. Align the key holes in the cart rear panel (8) with the 4 screws just
installed into the cart left and right side panels. Push cart rear panel
(8) onto screws and down to meet bottom shelf (1).
2. Secure the cart rear panel (8) to the
bottom shelf (1) with two screws (A).
Next, tighten the 4 screws on the cart
left and right side panels (4 and 5).
Hardware Used
A
Step 6
Hardware Used
A
LP Gas Grill
ASSEMBLY INSTRUCTIONS
M6x12
2 pc
Scr ew
Secure the upper door brace (9)
to the cart left and right side panels
using four screws (A), and then
tighten the screws.
5
4
4
M6x12
4 pc
Scr ew
A
A
9
4
1
Tighten
Screw (A).
5
A
8 5
9
A: M6x12 Scr
Qty: 4pcs
11