Dyna-Glo DGP350NP Manuel De L'utilisateur Et Instructions D'utilisation page 12

Step 3
1. Attach the cart left side panel
(4) to the bottom shelf (1) with
two screws (A), but do not
fully tighten.
2. Attach the cart right side
panel (5) to the bottom shelf (1)
in the same way.
Hardware Used
A
Step 4
Install two screws (A) into the cart left side
panel and two screws (A) into the cart right
side panel (5) as illustrated at right. Do not
fully tighten screws (keep approximately 4
to 6mm from fully installed) as the cart rear
panel (8) has key hole slots that need to slide
onto these screws.
Hardware Used
A
10
LP Gas Grill
ASSEMBLY INSTRUCTIONS
4
M6x12
4 pc
Scr ew
1 5
M6x12
4 pc
Scr ew
4
1
5
A
5
A
A
A: M6x12 Screw
Qty: 4pcs
8