Assembly Instructions - Dyna-Glo DGP350NP Manuel De L'utilisateur Et Instructions D'utilisation

Table des Matières

Les langues disponibles

Step 1

1. Secure each locking caster (2) to the back side (side that is

beveled for access to locking mechanism when assembled and

upright) of the bottom shelf (1) using four screws (A) four spring

washers (F) ) and four flat washers (G). Then tighten all screws.

2. Install the casters (3) to the front side

(not beveled) of bottom shelf using four

screws (A) four spring washers (F) ) and

four flat washers (G). Then tighten all screws.

Hardware Used

Step 2

First, remove the pins (7) from

the cylinder holder (6). Insert the

cylinder holder (6) through the

holes in the bracket pre-attached

to the cart right side panel (5).

Lock in place with the pins (7).

Parts Used

LP Gas Grill