Dyna-Glo DGE530GSP Mode D'emploi page 17

ASSEMBLY INSTRUCTIONS
16. Open the lid, place 5 heat tents (F1), 3 cooking
grates (E1) and 1 warming rack (D1) on the
inside of the grill body (C1). Place side burner
cooking grate (R) onto left side burner table
(T). Insert the warming rack (D1) into the
four holes located on both sides of grill body.
17. Remove the igniter cap, insert AA battery (B)
into the igniter body with positive '+' end facing
out. Replace the igniter cap.
16
17
17
F1
D1
E1
R
B