Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3.3. Control panel:
3.4. Setting DAY AND TIME:
3.5. MANUAL mode:
• Press
once and by pressing (
within a range of +5ºC to + 35ºC. Then press (OK) to confi rm.
NOTE: We recommend a comfortable temperature of 22ºC in the bathroom.
NOTE: The screen permanently indicates the temperature in the bathroom (ROOM). Obvious-
ly, if the thermostat temperature is less than the actual temperature in the bathroom, the
heater will remain in standby mode or will stop. When the actual temperature is 2ºC below
the temperature set in the thermostat, the heater will come on automatically at the operating
power previously selected.
• The day of the week and the time can be set when the device
is in "standby" mode. Press (SET) for 3 seconds to access the
programming. First to fl ash is the day of the week (1 2 3 4 5
6 7), which can be updated by pressing (
fi rming by pressing (OK). Next, set the time and the minutes,
proceeding as follows.
• Press
until the medium power icon appears on the
screen (
).
• Next press
to select the desired operating power:
1.000 W
2.000 W
/
) you can adjust the thermostat's temperature
/
) and con-
19
Publicité
Table des Matières
