Replacement Parts - Bissell POWER FORCE 1290 Guide De L'utilisateur

Clearing clogs from the dirt cup
1. Unplug the vacuum from electrical outlet.
2. Remove the dirt cup from the vacuum,
following steps 1-3 of Emptying the dirt cup
on page 6.
3. Remove the dirt cup filter assembly from
the dirt cup, following step 2 of Clean the
dirt cup filter on page 6.
4. Tap the dirt cup filter assembly over
a garbage container to remove any dirt
or debris from the cyclone screen that
surrounds the dirt cup filter.

Replacement Parts

These items are available for purchase as accessories for your BISSELL vacuum:
To purchase visit www.BISSELL.com.
PART # PART NAME
160-2835 Cyclone Screen
160-2833 Post-Motor Filter
160-3057 Hose with Handle
160-3058 Crevice Tool
160-2839 Turbine Floor Tool
160-3062 Metal Base Multi-Surface
Floor Nozzle
160-3059 Upholstery Tool
www.bissell.ca
5. Reach up into the dirt cup to clear any dirt
or debris from the dirt cup.
6. Check to see if there are any clogs in the
suction inlet.
7. After clearing any dirt or debris from the
dirt cup, replace the dirt cup filter assembly
back in the dirt cup following step 5 of
Cleaning the dirt cup filter on page 6.
PART #
160-2834
160-2838
160-2664
160-3063
160-2840
160-3060
160-3061
PART NAME
Dirt Cup Filter and Foam Filter
Multi-Surface Floor Nozzle
Extension Wands (2)
TurboBrush™ Tool
Hard Floor Tool
Dusting Brush
Tool Holster
1-800-263-2535
7