Cleaning; Cleaning The Display; Cleaning The Appliance Interior; Cleaning The Fittings - Thermador T24IR902SP Guide D'utilisation Et D'entretien

en-us Cleaning
DCleaning
9
CAUTION
C l e a n i n g
AVOID DAMAGING THE APPLIANCE AND THE
EQUIPMENT.
Do not use abrasive, chloride-based or acidic
■
cleaning agents or solvents.
Do not use scouring or abrasive sponges.
■
The metallic surfaces may corrode.
Never clean the shelves or bins in the
■
dishwasher.
The parts may become deformed.

Cleaning the display

The change in temperature and humidity can cause
the controls to steam up.
Switch the clean lock on before cleaning.
~ "Clean lock" on page 12
Use a clean micro-fiber cloth for cleaning.

Cleaning the appliance interior

Proceed as follows:
Press the main On/Off switch.
1.
Take out food and store in a cool location.
2.
Place ice pack (if available) on the food.
Clean the appliance with a soft cloth, lukewarm
3.
water and a little pH-neutral washing-up liquid.
9
CAUTION
The rinsing water must not run into the light
or through the drainage hole into the
evaporation area.
Wipe door seal with clear water and dry
4.
thoroughly with a cloth.
Switch appliance back on and put in food.
5.

Cleaning the fittings

To clean, take the variable parts out of the
appliance.
~ "Equipment" on page 9
16
Care instructions for stainless steel
surfaces
When taking care of and cleaning stainless steel
surfaces, use only cleaning agents suitable for
stainless steel and a stainless steel cleaning cloth.
You can purchase a suitable stainless steel cleaning
cloth from customer service.
To prevent visible scratches, clean the stainless
steel surface in the direction of the structure.