Adjustments - Eaton Cutler-Hammer EGS Serie Mode D'emploi Et D'entretien

Instructional Booklet
Page 14 Effective: July 2008
MANUAL
LEVER
Figure 18. ATS Manual Operating Handle in Use Shown
Connected to Source 2.
SECTION 6: ADJUSTMENTS
6.1 General
Refer to IB00405004E-70-8664, supplied with the ATS for RTC-
50 Controller adjustments and functions.
For more information visit: www.eaton.com
O & M Manual for the EGS Automatic
Transfer Switch with RTC-50 Control
IB00405003E - 70-8662