Atag Teppan Yaki TY3011M Notice D'utilisation page 110

INSTALLATION INSTRUCTIONS
Installation situations
Installation situation table
Knob location
Installation next to a Magna Puzzelo appliance
Dependent on the installation situation, there are several
instructions for installing the teppan yaki into a worktop. Which
instructions to use depends on the position of the control
knobs ("front" or "top") and the worktop material selected
("wood" or "stone"). Also special sawing measurements apply
when integrating a teppan yaki with the ATAG Magna Puzzelo
appliances HI3171M, HG3111M and WO3111M.
"Front" or "top"
With "front" mounting, the control knobs are fi tted into the
kitchen front. With "top" mounting the control knobs are fi tted
into the worktop.
"Wood" or "stone"
"Wood" stands for all woodlike worktops that can be drilled
into, e.g. wood, plywood and chipboard. "Stone" represents all
stony worktops that are non-drillable, like marble or granite.
Use the table below to select the correct instruction for building
in the appliance. Please select the desired installation situation
and adhere to the corresponding order for building in the
appliance.
Knobs inside the
kitchen front
Knobs inside the
worktop
Attention: The control knobs cannot be mounted on the rear
wall.
EN 14
Installation situations
Worktop material
Wood
"Front"
Top-wood
Puzzelo
contents
Stone
Top-stone