Atag Teppan Yaki TY3011M Notice D'utilisation page 107

MAINTENANCE
Stubborn stains
Stubborn marks on a stainless steel grill plate are best removed
with a solution of warm water and washing-up liquid. You can
use a cleaning agent for stainless steel to clean the frame. Always
polish in the direction of the steel structure to avoid shine spots.
Never use anything sharp like steel wool or scourers. These
scourers cause scratches in the brush structure. Scouring and
polishing will cause shine spots on the frying area (this kind of
damage is not covered by the warranty).
If the above methods do not help to remove the stains, you can
clean the grill plate with a non-scratch scouring pad, which can
be ordered online at www.hps.nl. Remember to treat the entire
area in order to avoid discolouring. Also, as a follow-up treat the
grill plate with a polish or maintenance agent for stainless steel.
Please note that over the years the surface will slightly discolour.
Never use aggressive abrasives. They leave scratches in which
dirt and lime can accumulate. But if you should use an abrasive
anyway, please polish in the direction of the fi nish.
EN 11
Stubborn stains contents