KRESS KUW58.1 Manuel D'instructions page 8

optimum oscillating frequency according to the accessories used and the respective application.
Oscillation frequency
High oscillation frequency
Low oscillation frequency
APPLICATION
Warning: the sawing teeth are very sharp. Do not touch during mounting and application.
The workpiece must be clamped tightly before it is cut.
Universal-Fit
TM
Accessories work with other competitive tools.
Sawing
8
EN
Sanding
Rasping
Removing
grout
Scraping
We recommend that you purchase your accessories listed in the above list from the same store that sold you the
tool. Refer to the accessory packaging for further details. Store personnel can assist you and offer advice.
accessories available from Kress.
Pic
Application
Sanding, sawing, rasping and polishing stone and metal.
Scraping, polishing varnishes.
NAME
Bi-Metal Metal/Wood End
Cut Blade
Standard Wood End Cut
Blade
Precision Wood Cut Blade
HSS Semicircle Saw Blade
Sanding Pad (Perforated)
Sanding Finger Pad
Triangular Carbide Grit Rasp
Carbide Rasp (Finger
Shaped)
Carbide Grit Semicircle Saw
Blade
Diamond-Coated Semicircle
Saw Blade
Rigid Scraper Blade
Flexible Scraper Blade
APPLICATION
Wood, plastic, fiberglass, nails, non-
ferrous metals, thin sheet metal,
hardened fillers
Wood, plastic, drywall
Wood, soft plastics
Thin wood, plastic, fiberglass, non-
ferrous metals, thin sheet metal,
hardened fillers, window glazing
Wood, plastic, hardened fillers
Wood, plastic, hardened fillers
Wood, hardened adhesives, , thin set,
masonry
Wood, hardened adhesives, thin set,
masonry
Grout, porous concrete, masonry
Ceramic and stone tile, backerboard
Old paint, hardened adhesives, caulk,
carpet
Elastic sealants, paint, adhesive
residues, carpet.