Component List - KRESS KUW58.1 Manuel D'instructions

f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier
to control.
g) Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to be
performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
h) Keep handles and grasping surfaces
dry, clean and free from oil and grease.
Slippery handles and grasping surfaces do not
allow for safe handling and control of the tool in
unexpected situations.
5) Service
a) Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
SAFETY INSTRUCTION
FOR CUTTING
Hold the power tool by insulated gripping
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring or its own cord. Cutting accessory
6
contacting a "live" wire may make exposed metal parts
of the power tool "live" and could give the operator an
EN
electric shock.
SYMBOL
To reduce the risk of injury, user must
read instruction manual
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Double insulation
Before working with your tool make
sure that no power cords will be dam-
aged.
Avoid danger of injury from the sharp
edges of the accessories.
Accessories can become very hot while
working, presenting danger of burns!
Make sure the tool is unplugged prior to
changing accessories.
Waste electrical products must not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your local authorities or
retailer for recycling advice.
High oscillation frequency
Low oscillation frequency

COMPONENT LIST

HYPERLOCK ACCESSORY CLAMPING
TM
1.
LEVER
2. ON/OFF SWITCH
3. VARIABLE SPEED DIAL
4. CONSTANT SPEED ELECTRONICS
5. VENTING SLOTS
UNIVERSAL FIT
TM
6.
INTERFACE*
7. FLANGE
* Works with other oscillating tool brands' accessories.
The following compatible brands are trademarks
owned by third parties which may be registered by
their respective owners: Black & Decker
Chicago Electric , Craftsman
®
Genesis , Makita , Mastercraft
® ®
Performax , Porter Cable
®
Tool Shop .
®
Not all the accessories illustrated or described
are included in standard delivery.
ACCESSORY
, Bosch ,
® ®
, Dremel , Fein ,
® ® ®
, Milwaukee ,
® ®
, Ridgid , Ryobi , Skil , and
® ® ® ®