Titanwolf GRIFFIN Mode D'emploi page 11

5. Start-up
Take the device out of the packaging and remove all packaging material.
Connect the thrust controller to a free USB port on your computer.
To use the thruster you purchased, a driver installation is required. The driver in-
stallation is completely automatic due to Plug&Play.
Once the installation is completed, the device is ready for use.
Note: You have the possibility to connect a joystick, such as the „TITANWOLF VUL-
TURE" (https://www.titanwolf-gaming.de/vulture) to the USB port of the GRIFFIN
Thruster to use only one USB port of your computer.
6. Botton assignment
Each button on the thrust controller can be individually assigned. To do this,
select the button assignment in the game you want to play and assign the desired
buttons accordingly.
7. Safety instructions and liability disclaimer
Never try to open the device to carry out repairs or conversions. Avoid contact
with mains voltages. Do not short-circuit the product. The device is not certified
for use in the open air; only use it in dry conditions. Protect it from high humidity,
water and snow. Keep it away from high temperatures. Do not subject the device
to sudden changes in temperature or heavy vibration as this might damage
electronic components. Examine the device for damage before using it. The unit
should not be used if it has received an impact or has been damaged in any other
way. Please observe national regulations and restrictions. Do not use the device
for purposes other than those described in the instructions. This product is not a
toy. Keep it out of the reach of children or mentally impaired persons. Any repair
or alteration to the device not carried out by the original supplier, will invalidate
the warranty or guarantee. The product may only be used by persons who have
read and understood these instructions. The device specifications may change
without any separate prior notice to this effect.
11
English