Mato SB 23 Mode D'emploi page 12

7 Specifications:
Type
Tension
Frequency
Power supply
Protection type
Engine power
Max. flow rate
(free outlet)
Max. delivery pressure
Suction height
Thread
Volume
Temperature range
Dimensions
L x B x H (mm)
Weight
(Pump without accessories)
Pumped media:
The electric diaphragm pump is suitable for transferring and filling AdBlue urea solutions, water and
antifreeze.
Flammable liquids such as petrol and diesel, solvents, chemicals, corrosive media and
liquids with a viscosity > 20 cSt must not be conveyed with the pumps.
If media not listed here are used, please clarify this with our technical department.
8 Disposal:
Your contribution to environmental protection:
The operator must observe the applicable regulations for the display, installation and operation
of systems for handling substances hazardous to water (such as WHG, VawS and TRbF -
Federal German Water Act, Order on the storage, filling and transfer of hazardous media and
Technical regulations for flammable liquids)
12
MATO GmbH & Co. KG
SB 23 – 12V
12V DC
-
10A
IP54
0,12kW
23 l/min
1,6bar
3m
1" BSP
approx. 70
dB(A)
-5°C to 40°C
290 160 110
x x
3,5kg
After termination of use, the device must be disposed of correctly in accordance
with the applicable legal regulations.
/ Benzstr. 16-24 / 63165 Mühlheim a. Main / Tel:00 49(0)6108-906-0 / Fax: 00 49(0)6108-906-120
SB 23 – 230V SB 30 – 230V
230V AC 230V AC
50/60Hz 50/60Hz
1.5A
IP54
0,18kW 0,37kW
23 l/min 30 l/min
1,6bar 1,6bar
3m
1" BSP 1" BSP
approx. 70 approx. 70
dB(A)
-5°C to 40°C -5°C to 40°C
260 160 140 275
x x
4,4kg
Operating instructions
SB 23 - SB 30 - SB32
SB 32 – 12V
SB 32 – 24V
12 / 24V DC
-
1.5A 12A / 6A
IP54 IP54
0.18kW
32 l/min
1,6bar
3m 3m
1" BSP
approx. 70
dB(A) dB(A)
-5°C to 40°C
180 175 275 180
x x x
5,6kg 5.6kg
175
x