Assembly And Installation - TCL TAW Serie Mode D'emploi

REMOVE CHASSIS
Remove the six screws from the cabinet. (There are two screws on the top, left and right.)
1.
Hold the cabinet while pulling on the base handle to carefully remove the unit. Do not pull or
2.
lift near the top of the unit.
1.

Assembly and Installation

1.
Step 3:
Top Angle Rail and Side Bracket Installation
The top rail must be assembled prior to installing the air conditioner in the window
Place the air conditioner on a flat hard surface.
1.
Remove top rail from the bottom of the packaging material as shown.
2.
Secure the top rail to the unit with the 5/16" screws as shown in (Fig. 1).
3.
1.
Foam Gasket
and Top Angle Rail
Foam Gasket
and Top Angle Rail
NOTE: For safety reasons all 4 screws
must be used to attach the top rail.
NOTE: For safety reasons all 4 screws
must be used to attach the top rail.
Side
Retainer
Foam Gasket
and Top Angle Rail
Side
Retainer
Window Filler Panel
Window Filler Panel
Side Retainer
NOTE: For safety reasons all 4 screws
must be used to attach the top rail.
Side Retainer
6
Side
Retainer
FRONT
FRONT
Do not pull
or lift in this area-
damage to the unit
may result.
Do not pull
or lift in this area-
damage to the unit
may result.
FRONT
FRONT
FRONT
Do not pull
or lift in this area-
damage to the unit
may result.
FRONT
Window
Filler Panel
Window
Filler Panel