Bartscher MSI400 Mode D'emploi page 29

Preparing hot chocolate
Fig. 7 Remove the lid from the mug.
Fig. 8
Place the milk foaming rod in the mug.
Fig. 9
Pour the desired amount of milk into the mug (not above the
MAX marking of 400 ml). If more milk is poured into the mug, it
may splash during foaming.
Fig. 10
Place the desired amount of chocolate powder into the mug.
Fig. 11
Place the lid on the mug.
Place the mug on the heating plate. Connect the device to a single
Fig. 12
grounded socket.
Fig. 13
Press the button marked
come on, then the chocolate will be heated. After between 90-480 seconds
the device will turn off automatically and the control light will go off.
Remove the mug with hot chocolate and pour into cups. If it becomes
necessary to turn the device off during heating, press the button. To
resume heating, press the button again.
- 28 -
on the device's base; the control light will