Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
21
SERVICE AND ADJUSTMENT
2. . roubleshooting
Motor does not start or shredder stops during shredding:
No mains power = check the fuse protection
Connecting cable or plug or connector coupling faulty = have these checked by an expert.
Motor switched off by overload protection = blockage in cutting gear.
Shredder blades blocked by material = open feed intake opening, remove material to be chopped,
Blockage in the cutting chamber = switch motor off, remove mains plug. Open the feed intake tube.
Rotate shredding disk on counter-clockwise and remove chopped material.
Faults/blockages in the cutting chamber can be caused by blunt blades.= have the machine checked by
the specialist.
Please contact your local dealer for any disorders and faults that are not shown here. Any repairs requiring
specialist knowledge should be performed by a specialist. Your local WEIBANG dealer will also be happy to
help you. You should not wish to carry out the maintenance work described above yourself.
Publicité
Chapitres
Table des Matières
