Design And Function; Complete Overview; Metal Rack - CASO DESIGN MG25CERAMIC menu Mode D'emploi

13 Design and Function

This chapter provides you with important safety notices on the design and function of the
device.

13.1 Complete overview

13.1.1

Metal rack


Place the metal rack into the device with the round spacer facing the direction of the
inner rear wall. Check that the metal rack is placed correctly.
Attention
► The rubber stoppers may not be removed from the metal rack.
► Only place the metal rack in the direction displayed in the diagram.
caso MG25CERAMIC menu
► The ventilator can continue running afterwards to cool down
the device.
ATTENTION
► The CERAMIC base plate can be hot following the cooking
time. Do not touch the CERAMIC base plate!
Please note
(1) Protective door
latch
(2) Oven window
(3) CERAMIC base
plate
(4) Operating panel
(5) Oven ventilation
opening (Do not
remove film!)
(6) Grill element
(7) Door opener
(8) Metal rack
47