NSK SGS Serie Mode D'emploi page 7

4-2 Disconnecting
Hold the Motor and the Handpiece, then pull apart.
CAUTION
• Do not connect or disconnect the handpiece until the motor has completely stopped.
• Connect ONLY to E type motors (ISO 3964) with the Max. Speed of 40,000 min
5. Mounting and Removing the Bur
5-1 Mounting the Bur
1) Turn the Bur Lock Ring in the direction of the "
2) Insert the bur fully into the chuck then turn the Bur Lock Ring in the direction of the "
until the " " mark and the "
3) Confirm that the bur is secure by gently pulling and pushing the bur.
6
" mark until it clicks. (Fig. 2)
" mark align with a click.
-1
or less.
Bur Lock Ring
Open
" mark
Close
Chuck Open
Chuck Closed
Fig. 2