Receiver Installation - Flash DIGI 2 HF Mode D'emploi

Receiver installation

!
Before working on the installation, isolate all
electrical supplies. All electrical wiring must
be carried out by a qualified person.
For easier installation, the Thermoflash DIGI 2 HF
kit is suppplied with a flexible 4-wire 1,5 mm
cable of 1.20m length (not connected).
We recommend using this cable for connecting the
HF receiver according to the following colour
codes:
brown = phase
blue = neutral
à
gray
connection to the boiler
black
L
N
L
5 4 3 2
When two appliances (heating and cooling) are
!
connected, always keep one of them switched
off to prevent their simultaneous operation
during the same season.
2
L
N
N
1
L N
5 4 3 2 1
16
L
N
L N
5 4 3 2 1
33 rue Saint-Nicolas
B.P. 50152 - 67704 SAVERNE Cedex
Tél. 03 88 01 88 01 - Fax 03 88 01 88 90
www.flash.fr