Eyelet - Singer C440 Manuel D'instructions

10. Fold the fabric and stitch along the seams on each side,
just a needle width from the original stitching line. Remove
the basting.
c. Wrong side of fabric
11. Fold the fabric along the buttonhole end and stitch
triangular ends on the original stitching line.
12. Press and trim the patch to within 5 mm (3/16") of the
stitching.
a. Right side of fabric
b. Wrong side of fabric
NOTE: When sewing lighter weight fabric, reinforce buttonhole
area. Cut a patch of fusible interfacing 3 cm (1 1/4") wider and
2 cm (3/4") longer than the buttonhole. Fuse to wrong side over
each buttonhole marking.

EYELET

This stitch pattern is used for making belt holes and other
similar applications.
30 Eyelet
Satin Foot (B)
1. Place the fabric under the presser foot and lower the
presser foot. Start the machine.
Machine will sew the eyelet and stop automatically.
2. Press the Thread Cutter button and raise the presser foot.
3. Make a hole in the center of the eyelet.
NOTE: Eyelet punch is not provided with this machine.
Sewing
36