Table des Matières
Publicité
PROGRAMMABLE
DECORATIVE STITCH &
LETTER STITCH SEWING
You can combine decorative & letter stitches into a
sequence by selecting each pattern.
A. SELECTING DECORATIVE & LETTER
STITCH (selecting mode)
1. Press the decorative & letter stitch button.
First 5 patterns of decorative patterns will be
indicated on the lower line of LCD.
2. By pressing the decorative & letter stitch button,
selecting group will change as below.
a. Decorative stitches
b. Block style font
c. Script style font
d. Italic style font
e. Outline style font
f. Cyrillic style font
3. After you select the group, press the scroll down
button. Next 5 patterns of selected group will
appear.
By pressing the scroll up or down button,
you can scroll up or down in increments of 5
patterns.
4. To select a pattern, press the function button
directly under the indicated pattern.
Selected pattern will be indicated on the top left
side of LCD.
5. Using this same procedure, select the next
patterns.
Patterns will appear at the top of the LCD in the
order selected.
6. As selected patterns over the indicating area,
disappear from the screen, you can check them
by pressing the cursor buttons. (See next page)
Note:
Machine can memorize a maximum of 60
patterns.
You can combine the tack stitch (Pattern
No. 34). This is used for sewing a single
combination of patterns. (See page 94)
B. SHIFTING THE CURSOR
Additional patterns may be added to the end of
a string of combined patterns. Shift the "I" cursor
over to the right, following the pattern string and
then select new patterns.
By pressing the cursor buttons, cursor will shift left
or right. The cursor position will be highlighted.
a. Press the cursor left button "<" and cursor will
shift to the left.
b. By pressing the cursor right button ">", cursor
will shift right.
86
Publicité
Table des Matières
