oneConcept Beaufort Mode D'emploi page 43

(X) Setting
Switch between the measuring modes Rain/1h, R./ 24h, R./week, R/
1
month, Rainfall (tot.)
2
Switch between the display in cm and inches
High rainfall alarm: Use +/- and ON / OFF to set the amount of rain at
3
which an alarm sound should be emitted. When the alarm is active, a
corresponding icon is shown on the display.
Display of the highest amount of rain measured so far (flashing). Press
4
and hold the display for 3 seconds to set the previous record to the
current value.
Reset: Press here for 3 seconds to reset (0) all precipitation
5
measurements (day, week, month and total).
(X) = The number of times the display must be tapped to access the
corresponding settings
Rain
EN
43