Publicité
Les langues disponibles
Les langues disponibles
Battery Replacement
Under normal conditions, the original batteries in
your UPS will last many years. See Safety section
before replacing batteries. The batteries are
designed for hot-swap replacement (i.e. leaving
the UPS in ON mode), but some qualified service
personnel may wish to put the UPS in the OFF
mode and disconnect equipment before
proceeding.
Procedure
1
Remove Front Panel
2
Disconnect Batteries
3
Remove/Dispose of Batteries
4
Add Batteries
5
Connect Batteries
Attach connectors: black-to-black and red-to-red.
6
Replace Front Panel
13-12-130-93328A.indb 11
1
2
3
11
6
5
4
1/6/2014 2:59:24 PM
Publicité
Chapitres
