Important Safety Instructions - Tripp-Lite U280-010 Manuel De L'utilisateur

Important Safety Instructions

• Always read the safety instructions carefully.
• Keep these instructions for future reference.
• Do not install near any heat sources such as radiators, heat registers,
stoves, or other equipment (including amplifiers) that produces heat.
• Unplug the unit during lightning storms or when unused for extended
periods of time.
• To reduce the risk of fire or electric shock, do not expose this unit to rain
or moisture, including any dripping or splashing.
• Objects filled with liquids, such as vases, should never be placed on or
near the unit.
• The unit presents an electric shock hazard; do not open.
• The outlet used to power the unit should be easily accessible and located
near the equipment.
• The power supply cord is for indoor use only.
• Maximum ambient temperature around the adapter must not exceed
25°C (77°F).
• The power supply cord's plug and inlet are used as the disconnect device
for the unit and its connected peripherals. The power supply cord should
be easily accessible during operation.
• Please refer to the marking label on the unit for input and output ratings.
Do not overload the power supply.
• Use of this equipment in life support applications where failure of this
equipment can reasonably be expected to cause the failure of the life
support equipment or to significantly affect its safety or effectiveness
is not recommended. Do not use this equipment in the presence of a
flammable anesthetic mixture with air, oxygen or nitrous oxide.
15-03-082-93343A.indb 2
2
4/1/2015 2:00:44 PM