Trigano J-JOU129 Mode D'emploi page 24

STEP 2 : Feet assembly (n°5 et n°6)
Slide all vertical leg extensions (6) onto the leg base (5) as shown.
STEP 3 : Frame and feet assembly
A. Two persons are required at this point to assemble the trampoline. A person places vertically foot assemblies
mounted in step 2 and inserts one of the sleeves of a rail structure on an extension of the foot. The other person holds
the other end and inserts the part into the other extension leg. You should now have two sets of feet held together by a
rail structure with sleeve.
B. Now install the other structure rail (4) in the spaces between the extensions of the vertical legs (6) by fitting, as
shown below:
24