Dyna-Glo DGO1176BDC-D Mode D'emploi page 9

ASSEMBLY INSTRUCTIONS
8. Attach lifting handle (B) to smoker body-right (J)
using four M6x12 screw (AA).
Hardware Used
AA M6 x 12mm
Screw
9. Insert the cooking grate supports (F) into the
corresponding holes on rack of the shelf inside
the smoker body (G) from the bottom up. NOTE:
There are 12 positions to install the cooking grate
supports. The cooking grate supports can be
installed in positions according to the need of
the owner.
x 4
9
8
9
G
AA
B
J
F