ASROCK 790GX Pro Mode D'emploi page 23

D. MIC_RET and OUT_RET are for HD audio panel only. You don't
need to connect them for AC'97 audio panel.
E. To activate the front mic.
For Windows
Select "Mixer". Select "Recorder". Then click "FrontMic".
For Windows
Go to the "FrontMic" Tab in the Realtek Control panel. Adjust
"Recording Volume".
System Panel Header
(9-pin PANEL1)
(see p.2 No. 14)
Power LED Header
(3-pin PLED1)
(see p.2 No. 22)
Chassis Speaker Header
(4-pin SPEAKER 1)
(see p.2 No. 17)
Chassis, NB and Power Fan Connectors
(4-pin CHA_FAN1)
(see p.2 No. 16)
(3-pin CHA_FAN2)
(see p.2 No. 15)
(3-pin PWR_FAN1)
(see p.2 No. 39)
(3-pin NB_FAN1)
(see p.2 No. 9)
ASRock
®
XP / XP 64-bit OS:
® TM TM
7 / 7 64-bit / Vista / Vista
This header accommodates
several system front panel
functions.
Please connect the chassis
power LED to this header to
indicate system power status.
The LED is on when the system
is operating. The LED keeps
blinking in S1 state. The LED is
off in S3/S4 state or S5 state
(power off).
Please connect the chassis
speaker to this header.
Please connect the fan cables
to the fan connectors and
match the black wire to the
790GX Pro Motherboard
64-bit OS:
23 23 23
23 23