JAC FULL Notice D'utilisation Originale page 13

F. Lay the frame down forwards. Replace the blades on the rear frame (place something to
protect yourself on the front frame blades). Remove the locknuts on the screws B. Remove the
blade-tightening Allen screws B. Replace the blades, checking that they locate correctly in the
swing arm pins. Retighten the blades by tightening screws B, using the blades remaining on
the frame as a reference. Then tighten the nuts (machine fitted with lubrication option).
In order not to distort the frame and avoid the risk of dangerous breakages, only replace 1 to 3
blades at a time alternating from left to right.
Resume the procedure from point F for the front frame and refit the front frame and the cover
sections. When reassembling, be sure to check that the front table slides under the rear table at the
blades.
Connect your machine to the mains supply; it is now ready.
Check that your approved agent has recorded his work in your service booklet in order to maintain
your 5-year warranty cover.
13
English