Emergency Stop Strap - Direct Healthcare Group SystemRoMedic RiseAtlas450M med QuickTrolleySystem Manuel Utilisateur

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 164

Emergency Stop Strap

When the lift is correctly installed in the trolley system, the emergency
stop strap needs to be adjusted. The emergency stop strap is cut at a
height where the strap doesn´t interfere with a normal lifting situation but
at the same time is easily reached by all users.
The strap is cut with scissors and singed at the end as to prevent unravel.
Direct Healthcare Group recommends a height of 180 cm/70 inches
above the floor.
Assembly of charger unit
The following is included in the charger station package:
Holder
Charger cup
Charger cable (EU, UK, US connectors included)
(fixtures between charger station and wall/freestanding rail not included)
Charger station
a) Secure holder to charger station on wall/freestanding rail system. Recommended
height is 110-120 cm from floor.
b) Mount the charger cable. If necessary mount the cover for the charger.
c) Connect the accompanying hand control to the charger station and the hand
control cable to the lift unit. Check charger function.
4
180 cm
SystemRoMedic
M A N U A L
TM

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

5010005750100051Systemromedic riseatlas450m

Table des Matières