Ec Conformity Declaration; Technical Specifications - Cardin Elettronica MORPH433W01 Mode D'emploi

ENGLISH
Before commencing with the installation of this appliance make sure that you have read the following instruc-
tions carefully. The use and installation of these appliances must rigorously respect the indications supplied by
the manufacturer. The manufacturer accepts no liability for damage caused by, or situations arising from, the
improper use of these appliances. These instructions are aimed at professionally qualified "installers of electrical
equipment" and must respect the local standards and regulations in force.
Attention! This symbol indicates that once the products life-span has expired it must be disposed of sepa-
rately from other rubbish. The user is therefore obliged to either take the product to a suitable differential
collection site for electronic and electrical goods or to send it back to the manufacturer if the intention is to
replace it with a new equivalent version of the same product. Suitable differential collection, environmental
friendly treatment and disposal contributes to avoiding negative effects on the ambient and consequently health as
well as favouring the recycling of materials. Illicitly disposing of this product by the owner is punishable by law and
will be dealt with according to the laws and standards of the individual member nation.

EC conformity declaration

The constructor declares that the Morpheus radio control system complies with the provisions of
the EC directive 99/05/CE (R&TTE) and that the following standards and/or technical specifications
have been applied:
- EN 60950-1 = 2004; EN 300220-2 = 2010; EN 301489-3 = 2001; EN 301489-1 = 2008.
Description
The MORPH433W01 interface is a device which is able to decode a radio frequency signal coming
from a Cardin Morpheus transceiver. Once decoded this signal is converted into a digital frame
containing the transmitter code it is sent to the output in 13 different formats which can be selected
by means of a four-way Dip-switch. The output signals follow the ISO-3554 standard encoded in
ABA track (RCP, RDP, CLS signals), the WIEGAND protocol (Datao and Data1 signals in 11 pos-
sible configurations) or the SERIAL protocol. The interface also has an enable contact "EN" which
can be wired to a timer or a normal switch allowing you to activate or deactivate the interface in
different time bands. The USB interface (no matter which protocol you have selected) allows you to
connect the device to a personal computer.

TECHNICAL SPECIFICATIONS

Power supply ............................................................................................................................... 12/24 Vac-dc
Power consumption ................................................................................................................................45 mA
Maximum range via radio: 100 - 700 m in open space with an external antenna
Outputs : 5V - 12V - TTL Open Collector
Voh = 0.85 x Vdd:
Vol = 0.4V, Iol = 15 mA max
Stationary multiprotocol interface
- reception/transmission frequency .............................................................................................. 433,92 MHz
- frequency tolerance ...........................................................................................................................±10 kHz
- selectivity............................................................................................................................................±43 kHz
- modulation ............................................................................................................................................... FSK
- modulation with ∆F ............................................................................................................................≤10 kHz
- Antenna impedance .................................................................................................................................50 Ω
- Operating temperature ............................................................................................................. -20°...+75 °C
REMARKS
Vdd = 5V, Ioh = 1.2 mA max.
Vdd = 12V, Ioh = 2.9 mA max.
14
ENGLISH
1