Beurer LV 50 Fresh Breeze Mode D'emploi page 21

Masquer les pouces Voir aussi pour LV 50 Fresh Breeze:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 32
• DO NOT attempt to repair or adjust any electrical or mechanical functions on
this device. Failure to do so voids your warranty. There are no parts inside the
device that can be serviced by the user (apart from replacing the evaporation
filter). Any maintenance work must be carried out by qualified personnel only.
• Ensure that the openings of the device and the micro USB cable do not come
into contact with water, steam or other liquids.
• Never reach for a device that is submerged in water. Immediately unplug the
mains adapter or micro USB cable from the wall socket/ computer.
• Use only clean water. If the water is very hard, use distilled water.
• Never carry the device when the PET bottle attached and full of water.
• Never place the device upside down.
• Place the device on a firm, level surface. Ensure that there is a distance of at
least 15 cm between the device and the wall.
• Keep the device away from heat sources, such as ovens and radiators.
• If you notice an unusual smell when using the device in the intended manner,
switch off the device and disconnect it from the power supply. Contact Customer
Services at www.beurer.com .
• Do not use aroma oils for application.
• Do not point the air outlet towards an electrical device, book or wooden object.
• The device should ideally be carried by the carrying handle. The carrying handle
cannot be exchanged. Never carry the device by the PET bottle or when there
is water in the water basin.
• Do not use the device in the bathroom or other damp, enclosed rooms.
• Protect the device from impacts.
21

Publicité

Table des Matières
loading

Table des Matières