Name Function - Niko 10-826 Mode D'emploi

Terminal Name
18 / 28 a
19/29 b
20/30 P
21/31 M
22, 24, 32, 34 V1
23, 25, 33, 35 V2
1 a
2 b
3 P
4 M
5 V1
6 V2
12 S1
13 S2
14 S3
15 S4
16 STEP
17 P
2.2. Information and control elements
Colour LED
Green
Red
Yellow
EN
Function
Bus connection, can be used simultaneously for cameras 1 and 2 / 3 and 4
Power supply voltage (+)18 V... 26 V, can be used simultaneously for cameras 1 and 2 / 3 and 4
Mass power supply voltage (–), can be used simultaneously for cameras 1 and 2 / 3 and 4
Incoming video signal from cameras 1 / 2 / 3 / 4
Bus connection
Power supply voltage (+)18 V... 26 V
Mass power supply voltage (-)
Outgoing video signal for the internal video units
Connection for push buttons or contacts to manually select the video input
Input to manually switch to the next video source
P terminal for connection of push buttons (if required)
Information about
Status device
Status video inputs
Status push button inputs
(contacts)
Meaning
• OFF: device is not ready for use
• ON: device is ready for use
• Flashing: error indication (3 possibilities) see § 5
• OFF: this camera is not selected
• ON: this camera is selected
• OFF: contact is open
• ON: contact is closed
10-826
21