Important - Kuppersbusch B9330.0S Mode D'emploi

3. Turn the control dial to position
4. You will hear a beep indicating that the Öko-
clean cycle has started. Symbol
slowly and the time remain-ing to complete
the cycle will appear on the display.
IMPO RT ANT
The duration of this cycle cannot be
changed. To stop the cycle before it is fin-
ished, turn the control dial to position
5. When the cycle is finished, the oven will turn
itself off, an alarm will sound and symbol
will flash quickly.
6. Touch any sensor with your fingertip to stop
the alarm and to turn off symbol
7. Turn the control dial to position
8. Any traces of dirt and excess water can now
be removed with a damp cloth.
IMPO RT ANT
Do not open the oven door until the cleaning
programme has completely finished as the
cooling phase is necessary for it to work
properly.
16
User's Guide
The cleaning programme should be done at
a low temperature. When it has finished, any
residue can be safely removed with a damp
cloth. Cooling times vary depending on the
room temperature. Before touching any in-
side surface of the oven, check that it is
cool.
HOW TO USE THE TR
CYCLE
.
Ökoclean enamel's excellent properties mean
that any traces of cooked food can easily be
will flash
removed from the trays. If stubborn traces of
cooked food remain after normal cleaning, do
the following:
1. Place the tray that needs cleaning on the
middle shelf support.
2. With the oven cold, slowly pour 300 ml of
water into the tray.
.
3. Select the Ökoclean cleaning function.
Ökoclean enamel has been designed to be
cleaned using the oven's automatic cleaning
programme and other cleaning methods can
.
damage it. Anti-limescale products in par-
.
ticular can seriously damage the enamel's
properties.
Ökoclean enamelled oven trays should not
be cleaned in the dishwasher. If deep clean-
ing is needed, use a gentle detergent.
Some foods such as tomato, vinegar or salt-
cooked roasts, can make the enamel's sur-
face appear to change; this is normal.
AY- CLEANING
IMPO RT ANT