Technical Data; Intended Use; Safety Informations - BGS technic 1609 Mode D'emploi

TECHNICAL DATA

Input air pressure: 6.2 - 9.6 Bar (90 - 140 PSI)
Air inlet thread: 1/4" x 18 NPT
Oil outlet thread: 3/8" x 18 NPT
Max. outlet pressure: 689 Bar (10000 PSI)
Oil tank capacity: 1.9 Liter
Usable oil capacity: 1.6 Liter
Weight: 8.5 Kg
Dimensions: 261 x 135 x 185 mm
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.

INTENDED USE

This air-assisted hydraulic pump provides oil pressure for hydraulic tools.
The ratio of oil pressure to compressed air is 100: 1.
Air pressure of 6.89 bar at the air inlet causes 689 bar at the oil pressure outlet.

SAFETY INFORMATIONS

When using hydraulic tools, fundamental precautionary measures must always be ensured, in order
to reduce the risk of personal injury and property damage.
•
Keep children and unauthorised persons away from the work area.
•
Do not let any children play with the tool or its packaging.
•
Make sure that the work area is sufficiently illuminated.
•
Keep the work area clean, organised, dry and free from other materials.
•
Do allow untrained persons work with this hydraulic tool.
•
Always wear safety goggles and gloves when working with hydraulic pump.
•
This hydraulic pump is able to generate pressures of up to 689 bar. Be careful, do not touch
any hoses or hose connections that are under pressure. Only use hydraulic accessories that
can withstand the high pressure.
•
Make certain the hydraulic pump is in proper working condition, when working with it.
•
Operate the foot valve until the work is finished only, prolonged activation can damage the
pump, hose and hose connections.
•
Keep an eye on the hydraulic tools and the surrounding area during operation.
•
Interrupt work with the hydraulic unit if it does not work properly.
•
Make sure that hands are not injured by reaching into or through hydraulic tools. Never reach
into or through hydraulic tools and make sure you keep sufficient distance.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Air Hydraulic Pump
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 1609
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed